StarShoot Autoguider

389.95 $

-Finally, an easy-to-use, affordable autoguider for long-exposure astrophotography
-Uses a 1/2″ format 1.3MP CMOS chip, with 5.2 x 5.2 micron pixels for highly accurate guiding
-Compact housing measures just 2.5″ x 2.35″ and weighs a mere 4.4 oz.
-Included software offers automatic calibration and guiding with a single mouse click
-Powered via your computer’s high-speed USB 2.0 connection; no other power source needed
-ST4 compatible autoguide output jack on camera body
-Compatible with Windows XP and Vista Operating Systems

Autoguiding has revolutionized the capture of deep-sky images by mechanizing the tedious and tiring method of “manually” guiding an exposure, which involved staring endlessly into an illuminated reticle telescope eyepiece while tweaking your mount’s electronic drive controls by hand to keep the stars pinpoint sharp. Until now, the problem has always been the lack of a simple, affordable autoguider camera to do the job.

Problem solved. The Orion StarShoot AutoGuider provides a user-friendly, dedicated autoguiding system for long-exposure astrophotography. It’s compatible with virtually any mount equipped with an autoguider port and comes with the software and cables needed to work right out of the box!

The AutoGuider’s sensor is a high-resolution, 1/2″ format 1.3-megapixel CMOS monochrome chip, with 5.2µ x 5.2µ pixels for highly accurate guiding. That high accuracy due to the small pixel size means you can use the AutoGuider with smaller, less expensive guide scopes than is possible with other guide cameras (such as the now-discontinued ST-4). The chip resides in a super-compact, anodized aluminum housing that measures just 2.5″wide by 2.35″ long and weighs a mere 4.4 oz. It has a 1.25″ nosepiece that can be removed to access a T-thread interface. And the AutoGuider’s short inward focus requirement of only 15mm from a typical 1.25″ Plössl telescope eyepiece makes it compatible with virtually any telescope.

The AutoGuider’s incredible ease of use will appeal to beginning and experienced astrophotographers alike. Includes highly acclaimed PHD Guiding software for the most intuitive and user-friendly autoguiding experience. The included PHD Guiding software requires no previous knowledge of autoguiding. It offers automatic calibration and guiding with literally a single mouse click. PHD Guiding has been ranked as the #1 guiding software in the 2007 “AstroPhoto Insight.” The camera is powered via your computer’s high-speed USB 2.0 connection with the included 10′ USB cable; no other power source is needed. A 6′ RJ-12 cable is also included to connect the AutoGuider to the mount without the need for an additional RS-232 adapter.

The StarShoot AutoGuider works well with Orion SteadyStar Adaptive Optics (AO) Guiders and included SteadyStar software to provide guiding of the highest accuracy.

With the Orion StarShoot AutoGuider, precision autoguiding for deep-sky photography is now easier and more economical than ever. Buy one today for your imaging setup! One-year limited warranty.

Requires PC running Windows XP or Vista 32/64-bit.

SKU: 08ORI00006 Category:

Description

-Finally, an easy-to-use, affordable autoguider for long-exposure astrophotography
-Uses a 1/2″ format 1.3MP CMOS chip, with 5.2 x 5.2 micron pixels for highly accurate guiding
-Compact housing measures just 2.5″ x 2.35″ and weighs a mere 4.4 oz.
-Included software offers automatic calibration and guiding with a single mouse click
-Powered via your computer’s high-speed USB 2.0 connection; no other power source needed
-ST4 compatible autoguide output jack on camera body
-Compatible with Windows XP and Vista Operating Systems

Autoguiding has revolutionized the capture of deep-sky images by mechanizing the tedious and tiring method of “manually” guiding an exposure, which involved staring endlessly into an illuminated reticle telescope eyepiece while tweaking your mount’s electronic drive controls by hand to keep the stars pinpoint sharp. Until now, the problem has always been the lack of a simple, affordable autoguider camera to do the job.

Problem solved. The Orion StarShoot AutoGuider provides a user-friendly, dedicated autoguiding system for long-exposure astrophotography. It’s compatible with virtually any mount equipped with an autoguider port and comes with the software and cables needed to work right out of the box!

The AutoGuider’s sensor is a high-resolution, 1/2″ format 1.3-megapixel CMOS monochrome chip, with 5.2µ x 5.2µ pixels for highly accurate guiding. That high accuracy due to the small pixel size means you can use the AutoGuider with smaller, less expensive guide scopes than is possible with other guide cameras (such as the now-discontinued ST-4). The chip resides in a super-compact, anodized aluminum housing that measures just 2.5″wide by 2.35″ long and weighs a mere 4.4 oz. It has a 1.25″ nosepiece that can be removed to access a T-thread interface. And the AutoGuider’s short inward focus requirement of only 15mm from a typical 1.25″ Plössl telescope eyepiece makes it compatible with virtually any telescope.

The AutoGuider’s incredible ease of use will appeal to beginning and experienced astrophotographers alike. Includes highly acclaimed PHD Guiding software for the most intuitive and user-friendly autoguiding experience. The included PHD Guiding software requires no previous knowledge of autoguiding. It offers automatic calibration and guiding with literally a single mouse click. PHD Guiding has been ranked as the #1 guiding software in the 2007 “AstroPhoto Insight.” The camera is powered via your computer’s high-speed USB 2.0 connection with the included 10′ USB cable; no other power source is needed. A 6′ RJ-12 cable is also included to connect the AutoGuider to the mount without the need for an additional RS-232 adapter.

The StarShoot AutoGuider works well with Orion SteadyStar Adaptive Optics (AO) Guiders and included SteadyStar software to provide guiding of the highest accuracy.

With the Orion StarShoot AutoGuider, precision autoguiding for deep-sky photography is now easier and more economical than ever. Buy one today for your imaging setup! One-year limited warranty.

Requires PC running Windows XP or Vista 32/64-bit.

Reviews

There are no reviews yet.

Be the first to review “StarShoot Autoguider”